Snap-on Tools - Racing Products
|
| |
Combination Locking Pliers Set
Spring loaded release lever allows quick “NO-PINCH” release. Locking nut secures jaw opening for repeat jobs. Jaws feature greater surface area and broader teeth for more secure gripping. Four piece set includes LP5WR, LP7WR, LP10WR, and LP6LN in a kit bag. Order LP404
|
|
Thin Curved Jaws Locking Pliers
Use for removal of socket-style sway bar links. The thinner jaws will fit between the stabilizer bar and the stabilizer link to allow a socket to be used for nut removal. Features larger jaw capacity to hold larger objects. Order
LP5SLIM
|
| |
Power Edge Diagonal Cutters
Features PowerEdge™ geometry for longer cutting life and more leverage with less effort. More cutting surface close to the joint for power cuts. The slight gap close to the joint keeps the tips from wearing prematurely during power cuts, keeping them sharp for more delicate cutting.
Order 86CF
|
| |
Needle Nose Pliers
Diamond serrated jaws provide a better grip with an up to 57% increase in pulling power. Features ramped tips for better accessibility and 26% stronger jaw tips. Also featured are longer, contoured handle for more comfort and better leverage.
Order 96CF
|
| |
Wire Stripper/Cutter/Crimper/Bolt Cutter
Pliers tip for grabbing or pulling wire. Patented internal spring keeps tool in the open, ready-to-use position. Cuts #6 and #8 soft bolts. Crimps both insulated and non-insulated terminals. Includes shears in throat area for general cutting applications.
Order PWCS9
|
| |
Variable Length Extension Set
Reach recessed fasteners quicker and easier in limited access applications. Applications include limited access areas around water pumps, fuel pumps and turbo mounting bolts. Spring loaded extension maintains contact with fastener. Set includes FXKV4 and FXKV7 in storage tray. Order
202FXKV
|
| |
Ball Swivel Universal Join
Welded pivot pin reinforces socket wall and allows a full 30° of uninterrupted, smooth action for efficient power transfer at any angle with no loss in torque output. New pin welding process eliminates the pin collar of older models. Order
IP80D
|
| |
5/8" Low Profile Spark Plug Socket
Low profile socket easily reaches 5/8" (16mm) spark plugs on muscle cars, ATVs, motorcycles and boats without interference from custom exhausts or chassis. Use ratcheting box wrench on 5/8" external hex drive. Order
S9724RHS
|
| |
13/16" Low Profile Spark Plug Socket
Same as above but for 13/16" spark plugs. Applications include small or big block Chevy, Ford, Mopar and other engines with 13/16" spark plugs and racing exhaust headers. Use with open end or ratcheting box wrench on 13/16" external hex drive. Order
S9704RHS
|
| |
7.2V Cordless Screwdriver
Includes screwdriver, two removable battery packs, charger and double-ended screwdriver bit in blow-molded storage case. Ideal for restricted access applications. Features 1/4" quick change chuck and can drive 35 #10 screws per charge.
Order CTS561
|
| |
Super Duty Impact Wrench
This super duty impact wrench provides 300 ft lbs of unmatched torque and 1400 blows per minute. Eight vane motor delivers maximum torque and speed. It weights only 2.88 lbs and is the only impact available with one-piece magnesium housing.
Order MG31
|
| |
5 Drawer Roll Cab
This rugged 5 Drawer Roll Cab epitomizes Snap-on quality: double
wall construction for strength and durability, rolled edges to reduce
the potential for injury and added strength, Lock'n Roll® drawers to prevent unwanted
drawer opening when moving unit, and more! Each drawer has 100lbs
load capacity. Order
KRA2005 |
