< Back to Results

ZEUS Training Module 11

Applies To: ZEUS

Troubleshooter: Code Tips, Symptom Tips, Common Problems, Tests and Procedures, Fast-Track Data Scan, Fast-Track Fixes



Welcome to Snap-on Training Solutions. This module is designed to help you get the most out of your ZEUS diagnostic tool, and covers the use of the Fast-Track Troubleshooter expert information.

The Snap-on Fast-Track Troubleshooter contains vehicle specific, experience-based tips designed to help you reduce repair time. Troubleshooter tips are gathered from actual repairs made by OEM and specialty technicians.

Code Tips

To get started, let’s select Troubleshooter from the Engine system main menu. Then select the system. For this vehicle, Engine is the only choice.

There are several tools within Troubleshooter to choose from. Let’s take a look at Code Tips using code P0103 as an example.

Select P0XXX. Then select P01XX Fuel and Air Metering. And there is our code, P0103. All the tips shown relate to the specific vehicle being tested.

Select the code to see code set conditions and test procedures.

To save time, the most common faults are shown first.

Some tips may show extra help in the form of a functional test or OEM service information. A button will be displayed if any related diagrams, specifications, or tests are available.

Just select the button to access the information.

Symptom Tips

Select Symptom Tips for step-by-step guidance to diagnose problems that do not set codes. Symptom Tips also contains information on thousands of known service issues.

Let’s select Driving Problems as an example. Let’s explore Lack of Power with no DTC.

Troubleshooter shows us that a common problem for this vehicle is a loose crank sensor trigger and also provides a simple test to verify this problem.

Time Savers

Time Savers provides even more useful information, like firing orders and even injector flushing procedures. Let’s take a quick look.

Select Engine Compartment. Select Cylinder Bank Layout. There you go, Cylinder Bank Layout and firing orders that quick!

Tests and Procedures

The Tests and Procedures section provides many ways to save diagnosis and repair time.

The After Repair Section provides procedures and information that should be performed after a vehicle repair, to ensure your repair has solved the customer’s problem.

This includes relearn procedures and functional tests.

Here’s an example of the relearn procedure needed to complete the repair of the passlock sensor.

Test The Part includes tests to confirm component failure, before you replace it.

For example, this EVAP test shows you how to test purge and vent solenoids.

Drive cycle procedures show the fastest way to set readiness monitors needed to complete emissions work.

Inspection and Adjustment provides additional service information for select vehicle systems. As an example, select the O2 Sensor Reset Procedure. This information explains the importance of clearing diagnostic trouble codes after replacing O2 sensors on this vehicle.

Fast-Track Fixes

Fast-Track Fixes provide proven fixes for common problems that have worked for technicians.

Here’s information for code P0101, resulting from a defective Mass Air Flow Sensor.

General Information

General Information provides vehicle specific terminology and abbreviation information.

Snap-on is dedicated to helping you get the most out of your diagnostic tool and keep your customers happy. Be sure to watch the rest of the modules in this Training Solutions series.

Last Updated: October 1, 2019

Got Questions?


Contact our Customer Care Department:

Email: techsales.uk@snapon.com

Tel: (01553) 692422

Mon-Fri 8.45am-5pm


For Snap-on Tools or to contact your local dealer, call (01536) 413800

E-mail kettcustserv@snapon.com


Software Subscription enquiries:

(01536) 413825 and choose option one

E-mail kettsubscriptions@snapon.com

Mon-Fri 8.30am-5pm


Snap-on is a trademark of Snap-on Incorporated.

All other marks are trademarks of their respective holders.

© 2019 Snap-on Incorporated. All Rights Reserved.

Got Questions?

Contact our Customer Care Department

Email: techsales.uk@snapon.com

Tel: (01553) 692422


For Snap-on Tools

or to contact your local dealer

call (01536) 413800

E-mail kettcustserv@snapon.com

We welcome your feedback on our website.


Enter your name:



Please rate your experience in the following:
(1 being an unpleasant experience and 10 being exceptional)


 1  2  3  4  5  6  7  8  9  10


 1  2  3  4  5  6  7  8  9  10


Suggested improvements:

Can we contact you by e-mail to discuss your feedack further?


If you would like to receive e-mails from Snap-on about product releases, developments and promotions, please click the box below.

Yes - I would like to receive further e-mails from Snap-on about product releases, developments and promotions

We have placed cookies on your computer to give you the best possible experience with our website. These cookies are also used to ensure we show you advertising that is relevant to you. If you continue without changing your settings, you are agreeing to our use of cookies to improve your user experience. You can click the cookie settings link on our website to change your cookie settings at any time.
Privacy Policy