< Back to Results

ZEUS Training Module 14

Applies To: ZEUS

Meters: Graphing Multimeter, Setup Tools, Scope Functions



Welcome to Snap-on Training Solutions. This module is designed to help you get the most out of your ZEUS diagnostic tool, and covers the use of the graphing multimeter and lab scope.

Graphing Multimeter

The graphing multimeter and lab scope are powerful diagnostic tools that give you the ability to directly test vehicle components, to verify faulty components before replacement.

To avoid damaging the meter, never attempt to measure more than the meter’s rated capacity.

To get started, select the Scope Multimeter icon from the Home Screen.

Select Graphing Multimeter to measure or monitor a signal, to see how its value changes over time.

You can select from 18 graphing meter tests and display options, including 4 channel Graphing Meter, Volts DC, Volts AC, Frequency, Pulse width, Duty cycle, and Dwell.

Before performing a resistance or current measurement, calibrate the meter to ensure accurate results. See the User Manual for the calibration procedure.

Most of these tests can be made with the standard leads included with the tool.

Here are some optional probes available for specialized tests to detect glitches in pressure, vacuum, and temperature in automotive applications.

Current measurements require the optional precision low amp probe. This is especially useful for finding parasitic loads, faulty injectors, coils, solenoids, pumps and relays. Contact your Snap-on representative to learn more.

Let’s select Volts DC to graph voltage change over time.

Here a constant voltage signal appears as a flat line, with no variation or glitches over time.

We can capture glitches and dropouts to detect wiring issues, failing components, and intermittent problems. The meter continuously records up to 262 screens of data for review. This makes it easy to perform a road test or a wiggle test, without having to watch the meter.

Pressing the pause/stop icon freezes the data recording so you can review it.

Use the double arrow icons to scroll one screen at a time. Use the single arrow icons to scroll one data point at a time. Or slide this scroll bar forward and back to quickly access all recorded data.

Setup Tools

Customize the meter display with these setup tools. The profile icons choose which channels to display.

Touch once to display a channel. And again to hide it. To move a channel up or down the scale, touch and drag the channel marker up or down.

With more than one channel activated, the graphing meter or scope can show relationships between components to detect one that is failing.

The probe menu gives you control over the type of test used on each channel, such as volts, dwell, pulse width, frequency, duty cycle, pressure, vacuum, and amps.

Scope Functions

At six million data samples per second, the Snap-on scope function can capture many more samples than displayed on most standard display screens.

To sample at the maximum rate, select the peak detect function to capture extremely fast peaks and glitches, like this missing ignition spike.

Activating Coupling AC subtracts the average value of a signal so that small variations display prominently on the waveform. This amplifies the signal without driving the waveform off the screen.

Select the Scope Trigger icon to set a threshold value that initiates the waveform display. When the voltage passes the threshold value, a new waveform begins. This produces a very stable waveform that does not flicker or drift.

The trigger point appears as a plus sign on the display. Touch and drag the plus sign to reposition it. Or touch Setup Trigger for a more precise setting.

Select Sweep to set the total time it takes for the data to fill the screen, anywhere from 1 to 20 seconds in meter mode and as short as 50 microseconds in lab scope mode.

Touch the scale value to change it with this pop-up menu. After making a menu selection, simply touch Back to hide the drop-down menu.

Both the graphing meter and lab scope track the minimum and maximum recorded values. Select the refresh icon to clear these values.

To see more detail at any time, touch the Shrink/Expand Icon to hide the control settings and expand the graphing display. Touch it again to show the control settings.

To learn more about Graphing Multimeter and Lab Scope functions and settings refer to the user manual. 

Snap-on is dedicated to helping you get the most out of your diagnostic tool and keep your customers happy. Be sure to watch the rest of the modules in this Training Solutions series.

Last Updated: October 1, 2019

Got Questions?


Contact our Customer Care Department:

Email: techsales.uk@snapon.com

Tel: (01553) 692422

Mon-Fri 8.45am-5pm


For Snap-on Tools or to contact your local dealer, call (01536) 413800

E-mail kettcustserv@snapon.com


Software Subscription enquiries:

(01536) 413825 and choose option one

E-mail kettsubscriptions@snapon.com

Mon-Fri 8.30am-5pm


Snap-on is a trademark of Snap-on Incorporated.

All other marks are trademarks of their respective holders.

© 2019 Snap-on Incorporated. All Rights Reserved.

Got Questions?

Contact our Customer Care Department

Email: techsales.uk@snapon.com

Tel: (01553) 692422


For Snap-on Tools

or to contact your local dealer

call (01536) 413800

E-mail kettcustserv@snapon.com

We welcome your feedback on our website.


Enter your name:



Please rate your experience in the following:
(1 being an unpleasant experience and 10 being exceptional)


 1  2  3  4  5  6  7  8  9  10


 1  2  3  4  5  6  7  8  9  10


Suggested improvements:

Can we contact you by e-mail to discuss your feedack further?


If you would like to receive e-mails from Snap-on about product releases, developments and promotions, please click the box below.

Yes - I would like to receive further e-mails from Snap-on about product releases, developments and promotions

We have placed cookies on your computer to give you the best possible experience with our website. These cookies are also used to ensure we show you advertising that is relevant to you. If you continue without changing your settings, you are agreeing to our use of cookies to improve your user experience. You can click the cookie settings link on our website to change your cookie settings at any time.
Privacy Policy