Supplying Power to the Diagnostic Tool

Your diagnostic tool can receive power from the following sources:

The diagnostic tool can be powered from the internal rechargeable battery pack. A fully charged battery pack provides sufficient power for about 5 hours of continuous operation.

The diagnostic tool can be powered from a standard AC outlet using the AC power supply. The AC power supply converts alternating current (AC) to direct current (DC) to power the diagnostic tool. The connector on the end of the output cable of the AC power supply connects to the AC power supply jack on the side of the diagnostic tool under the protective cover. Only use the AC power supply provided.

Only use the supplied AC power adapter. Never connect the AC power supply to the diagnostic tool when the diagnostic tool is communicating with a vehicle.

Power Supply

Supply Rating; 19 VDC, 3.4A

Power supply components included may vary depending on market.

The diagnostic tool can also be powered using an optional 12VDC vehicle power cable adapter. The power cable adapter uses vehicle power (from a standard vehicle power port) to power the diagnostic tool. Contact your sales representative to order this accessory.