Before you can use any of the companion Snap-on applications, you need to create a Snap-on Profile Manager account and link your diagnostic tool to it.

1.

Using an Internet connected device, visit https://ALTUSDRIVE.com and select Create Individual Account from the Login screen.

2.

Enter the required information and create a Username and Password, then select Create.

3.

At the “Success” confirmation screen, select Done.

4.

Log in using your Username and Password.

5.

Answer the security questions, then select Submit.

6.

At this point your basic profile is setup with the information required. You may continue to add addition personal information on the other tabs to add further details to your profile.

7.

To link your diagnostic tool (or thermal imager) to your profile, select the Add a Device tab and enter and save the following information.

●

Serial Number - serial number of the device

●

PIN - specific PIN associated to the device

●

Code - authorization code specific to the device

●

Device Name - user define name

8.

You may now add companion application authorization information as needed, such as:

●

Enter your Security Link authorization information

1.

Using an Internet connected device visit www.ALTUSDRIVE.com.

2.

Select the Login icon.

3.

Log in using your Username and Password .

4.

Select the Profile icon on the lower toolbar.

5.

Select Open Profile Manager.

6.

Enter your username and password to log in to Profile Manager.

See "Using Profile Manager" below for addition details.

To add or edit your Security Link authorization information, see Security Link authorization information

This screen manages the following account information:

●

Personal Information

●

Online Profile Information

This screen allows you to personalize your profile picture, by selecting one of the provided images.

Shop Information allows you to enter the name address, and phone number for your shop.

This information is also included in the header on Code Scan / Vehicle System Reports.

This screen manages devices associated with your account:

You must link your diagnostic tool (Add a device) to your Snap-on Profile Manger account to use applications like Snap-on Cloud and Security Link.

Select Add a Device to setup and add an authorized device (e.g. Diagnostic Tool, or Diagnostic Thermal Imager).

Enter the device information: (See the Get Connected information in your diagnostic tool)

●

Serial Number - serial number of the device

●

PIN - specific PIN associated to the device

●

Code - authorization code specific to the device

●

Device Name - user define name

When finished select Save to save and link the device to your account.

This screen allows you to add/manage your authorization credentials, in order to access secured gateway diagnostic features, see Security Link for details.

Select the logout icon (upper right screen) to log out of Profile Manager.

You will be logged out completely and a new browser tab will be opened.