Skip to Content
Main Content

Sun KoolKare Dual Gas Air Conditioning Set-up Guide

Last Updated: October 15, 2021

Overview

A step-by-step video guide to setting up your Sun KoolKare Dual Gas air conditioning unit.

Symptoms

This video will show you how to get your Sun KoolKare Dual Gas air conditioning unit ready for use in your workshop.


Resolution

Video Transcript

Video Transcription

 

REMOVE THE PACKAGING
  • Remove the four security locks from the box and then lift it up to take off
  • Remove the accessory pack
STARTING UP FOR THE FIRST TIME
  • Connect the power cable and switch on the machine
  • Follow the instructions on the monitor until you are presented with an activation code, which you should take a note of
  • Use a computer or tablet to open the activation website at www.ac-activation.com
  • Insert the activation code in the appropriate area then click on GET UNLOCK CODE and fill in all mandatory fields
  • Click on GET UNLOCK CODE at the bottom of the page and if the fields are completed correctly you will be shown your code
  • Enter this code on your Dual Gas and then press OK to unlock the system
  • Wait for the end of the initialisation procedure
  • Select the type of gas (R134a or R1234yf) and press OK
  • Enter Setup, select the operation language and confirm then return to the main menu
UNLOCKING THE SCALES
  • Undo the scale security locking nut on R1234yf and R134a scales
  • Check that the oil level is steady
TRACER DYE AND OILS
  • Wearing personal protective equipment (PPE), release and open bottle number 4
  • Fill it with 250ml of tracer dye for R1234yf then close and return the bottle to the unit
  • Release and open bottle number 3 then fill it with 250ml of oil for R1234yf before returning it to the unit
  • Release and open bottle number 2 then fill it with 250ml of oil for R134a before returning it to the unit
  • Release and open bottle number 1 then fill it with 250ml of tracer dye for R134a before returning it to the unit
  • WARNING: The use of oil and tracer dye not approved by the manufacturer could involve malfunction and warranty decline
REFILLING GAS TANK
  • Wearing PPE, attach the connector (supplied) to the external bottle and screw on to tighten
  • Select Maintenance from the unit’s homepage and then refill the tank
  • Connect the blue quick coupler to the external bottle then open the bottle valve and press OK
  • Enter a quantity between 600g and 10000g then wait for the phase to complete
  • After completion, close the external bottle valve and press OK
  • Wait for the recovery phase to complete then disconnect the external bottle and press OK, before returning to the main menu

YOUR UNIT IS NOW READY FOR USE

Applies To

KOOLKARE DUAL GAS

Manuals

Skip to Results Listingclear all

Diagnostics UK Product Family

clear
Please wait while we gather your results.

Results Updated

0 Results Listed

No documents were found matching your criteria.