Calibrating the Touch Screen

Overview

Symptoms

Touch screen seems to be out of calibration

Resolution

1. From the Windows toolbar select Start > PenMount Control Panel.
   
2. In the PM Control Panel; highlight the PenMount 6000 RS232 and select Configure.
   
3. Select one of two calibration options:
   
   – Standard—uses 5 points on the screen to quickly bring the unit into calibration. You can use your finger to calibrate the screen.
   – Advanced—uses 9, 16, or 25 points on the screen to accurately bring the unit into calibration. Use the dropdown menu to select the number of points, a stylus is required to calibrate the screen.
4. Touch and hold the center of each red box that displays in sequence.
   
5. Select OK to close the dialog boxes once the calibration is complete.