Skip to Content
Main Content

Take the brakes off brake testing with the latest Sun system, which has ATL and standard MOT options plus a 10-year roller brake surface warranty.

The testers now use a solid state motor control system.

Once the brake test is completed the results can be reviewed in the following ways:

  • On the display with highlighting of any errors
  • Printed and also recording reason for failure if applicable
  • You can store the results into the database for recalling at a later date
  • Recall and review the results in a graphical format
Sun Vehicle Brake Tester From Snap-on
  • Sun Vehicle Brake Tester From Snap-on
  • Roller Brake Tester
Open AllClose All
Specifications

*Snap-on reserves the right to make changes to specifications without notice and without making changes retroactively.

Roller Coefficient Dry-Wet0.9-0.7/0.7-0.5Operating Temperature0°C-70°CMotor Power2 x 3.7kwRoller Diameter204mmRoller Displaced in Height25mmFuse Rating C-Type32Voltage3N-PE-400VMaximum Axle Weight (Class IV; Class VII)4000kg; 6000kgMain Lead Diameter5 x 4mmIdle Running Speed (Class IV; Class VII)5.2kmh; 2.6kmhFrequency50HzRoller Length (Class IV; Class VII)700mm; 1000mmPrinciple of MeasurementDMSProcessing of Measured ValueMicroprocessor
Features

The chassis are built from fully galvanised steel for long life and include roller covers as standard

close modal
Built to last

The graphical user interface is designed for ease of use and simulates the well known meter displays from the older analogue units while including all the benefits of modern technology and the latest ATL test procedure and manual brake testing functions

close modal
Designed for ease of use

Sun Brake Testers are supplied with a 22-inch monitor, laser printer and database for saving test results as standard

close modal
Monitor, printer and database as standard

The roller brake surface includes a 10-year warranty, giving you long-term peace of mind

close modal
Ten-year warranty

The elimination of cables reduces the cause of trip hazards and wire damage

close modal
Tidier work area

  • 700mm rollers have a drive over capacity of up to 4000kg (800Kgf brake force) and can be used for MOT class I, II, III, and IV
  • 1000mm rollers have a drive over capacity up to 6000KG (1250Kgf brake force) and can be used for MOT class I, II, III, IV, VL and VII (class I and II require optional adaptor plate)

close modal
Two chassis options:

The dimpled roller surface is designed to offer protection to tyres while giving a coefficient similar to the road surface, allowing for accurate and repeatable results wet or dry

close modal
Unique roller surface

The weighing system allows weighing by wheel (standard on ATL, optional on non-ATL) as well as the auto sensing 4x4 option as standard

close modal
Weighing by wheel

With the wireless connectivity option between the roller chassis control box and the PC you have the flexibility to place your PC/display in the most convenient place in the workshop for testing (within the required range)

close modal
Wireless connectivity
Snap-on Finance

Get The Finance You Need With Snap-on

Snap-on Finance UK Ltd has over 30 years of experience in supporting the automotive industry, dealing exclusively in this market, and understands your needs.

We deal with your business requirements personally, professionally and in the way you expect from Snap-on.

Speak to the people you trust first for friendly, independent advice about your options. Hire purchase? Rental? Peace of mind deals? We can find the right solution for your business.

Click on the brochure below to read more.

 

Resource Centre

Contact Us

Whatever your question or query, the Snap-on Customer Care team is on hand to help you out.

Get in Touch