PID (Parameter Identification) Trigger Function

Parameter Identification (PID) TriggerA very handy feature of the diagnostic software on your Snap-on scan tool is the Parameter Identification (PID) trigger function.

Read on to learn how a Snap-on diagnostic tool gives you a simple way to monitor vehicle data when carrying out a road test as part of a repair.

A very handy feature of Snap-on’s diagnostic software is the parameter identification (PID) trigger function.

This helps you to keep track of the data produced by the vehicle while you’re carrying out your diagnosis, meaning you don’t need to keep watching your scan tool’s screen or have someone else helping you out.

You can set minimum and maximum values and if your data goes outside of those the PID trigger function will automatically save it for you so you can see it later.

For example, let’s work with a vehicle’s intake air temperature sensor and connect it to a Snap-on VERUS Edge scan tool.

Once you have the data on your tool’s screen, tap on the wrench icon to the left and you can turn the triggers on with your maximum and minimum figures.

Let’s keep the minimum as 0 volts and enter 4.5 volts as the maximum then save, and back on the graphs screen tap on the camera icon to activate those levels.

If you disconnect the sensor from the vehicle the reading goes above the maximum line, then the scan tool records a few more frames of data before saving it, so you don’t have to keep checking the screen.

A green line then shows at what point the data was saved, and in the tool’s settings you can tell it how many frames of data you want it to record after the readings have gone beyond the minimum or maximum levels you set up earlier.

Once you have this set-up it will save you a lot of time when it comes to recording data and diagnosing your vehicles.

See more articles on our News Center page.

Got Questions?

Get Answers Here
Car & Light Truck Diagnostics

Send e-mail
(800) 424-7226

Heavy-Duty Truck Diagnostics

Contact us here
(800) 311-5452

Request Product Information

Sign Up For Our Technical Help Articles Now!


Snap-on produces regular technical help articles based on real-world case studies by our team of experts.

Please tick the box below and enter your details to subscribe to our mailing list.

 Yes - please sign me up for your technical help articles


E-mail address: 

If you would like to receive further e-mails from Snap-on about product releases, developments and promotions, please also click the box below.

Yes - I would like to receive further e-mails from Snap-on about product releases, developments and promotions

Your name and e-mail address will only be used for the purposes you have agreed to on this form. Your data will not be shared with any third parties. You can unsubscribe at any time by clicking on the link in our e-mails.

Snap-on Diagnostic Tools and

Repair Information

Snap-on is a trademark of Snap-on Incorporated.

All other marks are marks of their respective holders.

©2020 Snap-on Incorporated. All Rights Reserved.

Got Questions?

Request Product Information

Online Product Help Here

Contact Diagnostic Customer Care

Send e-mail

(800) 424-7226

Mon - Fri 6am - 5pm PST


Product Registration:

• US     • Canada

Cookie Settings