< Back to Results

MODIS Edge Training Module 5

Applies To: MODIS Edge™
Overview:

Troubleshooter: Code Tips, Symptom Tips, Common Problems, Tests and Procedures, Fast-Track Fixes

Resolution:

VIDEO TRANSCRIPTION

Welcome to Snap-on Training Solutions. This module is designed to help you get the most out of your MODIS Edge diagnostic tool, and covers the use of the Fast-Track Troubleshooter expert information.

Technician with MODIS Edge

The Snap-on Fast-Track® Troubleshooter contains experience-based tips designed to show the likely diagnosis for a specific vehicle, and to save repair time. Troubleshooter tips are based on real-world experience of OEM’s and specialty technicians.

20-30 Microprocessors
Interdependent Systems

According to the Society of Automotive Engineers, the average vehicle has 20-30 micro-processors. 

Main Menu (Engine)

Each one monitors one or more interdependent systems and subsystems. A problem in one system, can show up as a symptom in another system.

Code Tips

Main Menu (Engine)

System Selection, Engine highlighted

To get started, select Troubleshooter from the main scanner menu. And select the vehicle system you want to diagnose.

Troubleshooter Main Menu 1

There are several tools within Troubleshooter to choose from. Let’s explore Code Tips. These take you down a step-by-step path, to determine the most likely components or circuits at the root of the problem.

Code Tip Selection 1

Let’s drill down to a specific Diagnostic Trouble Code or DTC, also known as fault codes. In this case we will diagnose a code P0103. Select P0XXX for powertrain codes.

Code Tip Selection 2

And select P01XX Fuel and Air Metering.

Code Tip Selection 3

And there is our code P0103. Only tips related to the specific vehicle being tested are shown, to quickly lead you to the root cause of the problem.

Code Tip

Select the code to see the reason the code is set and a brief test to isolate, test and confirm the suspected cause of the fault. The repair tip highlights known issues for this specific vehicle and code to make it easier to diagnose. Code Tips are designed to show the most common faults first, saving you time and frustration.

Troubleshooter Main Menu 2

Symptom Tips

Some problems don’t set a fault code. These can be particularly difficult to diagnose. The Symptom Tips in Troubleshooter can solve these problems, with step-by-step guidance to diagnose problems with no code. Select Symptom Tips.

Troubleshooter Problems Menu 1

Symptom Tips also contain information on thousands of known service issues. Here we see choices for several common problems. Let’s select Driving Problems.

Troubleshooter Problems Menu 2

What do we do when we have a lack of power?  Let’s select this item on the menu and find out.

Symptom Tip

Here we see the diagnostic power of Troubleshooter, a database of experience based information developed by master technicians. A common drivability problem for this specific vehicle is a loose crank sensor reluctor on the crankshaft.

Troubleshooter shows us a simple test to verify this problem.

Troubleshooter Main Menu 3

Time Savers

Let’s look at one of the newer features in Troubleshooter – Time Savers.

Troubleshooter Submenu Engine Compartment

Cylinder Bank Layout

You may need to know the firing order or the cylinder layout.

Cylinder Bank Layout information

Troubleshooter tells us the firing order for each engine size and the cylinder layout.

Troubleshooter Main Menu, Test and Procedures highlighted

Tests & Procedures

The Tests and Procedures section provides many ways to save diagnosis and repair time.

Tests & Procedures Main Menu, After Repair highlighted

After Repair Menu, CKP Sensor Relearn highlighted

After Repair Tip

The After Repair section shows methods to verify that your completed repair has completely solved the customer’s problem. Such as relearn procedures and functional tests needed to verify and complete the repair.

Tests & Procedures Main Menu, General Information highlighted

Abbreviations Used

Alphabet List 

Abbreviations List

Select General Information and you will find definitions for thousands of OEM terms and abbreviations, always at your fingertips.

Tests & Procedures Main Menu, Tests and Procedures highlighted

Test List, with Test the Part highlighted

Test List 1

Test List 2, EVAP System Test highlighted

EVAP System Test Instructions 1

EVAP System Test Instructions 2

EVAP System Test Instructions 3

Tests & Procedures covers thousands of simple tests to be certain a component is failed before you spend time replacing it. For example, this EVAP system test shows how to test purge and vent solenoids using your scanner.

Tests & Procedures Main Menu, Drive Cycle Procedures highlighted

Drive Cycle Menu

Drive Cycle Instructions 1

Drive Cycle Instructions 2

Drive Cycle Instructions 3

Drive Cycle procedures show the fastest way to set readiness monitors needed to complete emissions work.

Tests & Procedures Main Menu, Fast-Track Fixes highlighted

Fast-Track Fixes list 1

Fast-Track Fixes list 2, with P0446, Cleaned Vent Valve highlighted

Fast-Track Fixes text: Complaint, Cause, Correction

Fast-Track Fixes

Fast-Track Fixes cover common problems for the vehicle you are working on. These are proven fixes that have worked for technicians. Here we see a common fix for a P0446 code resulting from a plugged vent valve. Answers are shown in a straightforward Complaint, Cause, Correction format.

 

Last Updated: June 11, 2019

Snap-on Diagnostic Tools and

Repair Information

Snap-on is a trademark of Snap-on Incorporated.

All other marks are marks of their respective holders.

©2019 Snap-on Incorporated. All Rights Reserved.

Got Questions?

Request Product Information

Online Product Help Here

Contact Diagnostic Customer Care

Send e-mail

(800) 424-7226

Mon - Fri 6am - 5pm PST

 

Product Registration:

• US     • Canada

We welcome your feedback on our website.

 

Enter your name:

email:

 

Please rate your experience in the following:
(1 being an unpleasant experience and 10 being exceptional)

Navigation

 1  2  3  4  5  6  7  8  9  10

Content

 1  2  3  4  5  6  7  8  9  10

 

Suggested improvements:


Can we contact you by e-mail to discuss your feedack further?

Yes

If you would like to receive e-mails from Snap-on about product releases, developments and promotions, please click the box below.

Yes - I would like to receive further e-mails from Snap-on about product releases, developments and promotions

We have placed cookies on your computer to give you the best possible experience with our website. These cookies are also used to ensure we show you advertising that is relevant to you. If you continue without changing your settings, you are agreeing to our use of cookies to improve your user experience. You can click the cookie settings link on our website to change your cookie settings at any time.
Privacy Policy