< Back to Results

VERUS PRO Training Module 2

Applies To: VERUS® PRO
Overview:

Diagnostic Capabilities Overview

Resolution:

VIDEO TRANSCRIPT

Snap-on Training Solutions® helps you get the most out of your VERUS® PRO diagnostic tool. This training module covers the vehicle identification process and code operations.

Vehicle ID

The first step in diagnosing any vehicle is to select the vehicle ID. Your starting point to ID a vehicle is via the scanner icon on the home page.

Everything within the VERUS PRO diagnostic applications starts from here. Your two access points to ID a vehicle are via the SCANNER icon or the VEHICLE HISTORY icon. Scanner links you to the vehicle ID process and directions for the ECM connection.

First Lets review how to select a vehicle ID from a previous RO in VEHICLE HISTORY. Select VEHICLE HISTORY from the home screen menu.

Vehicle History

Vehicle History allows easy entry for vehicles that have been ID'd before. These are known as an RO or Repair Order. The VERUS PRO can hold as many previous ROs as the hard drive will allow, virtually unlimited. Once in the vehicle history folder simply select or highlight one of the previous Repair Orders.

The vehicle ID in the lower tool bar may still indicate the prior vehicle you were working on and we’ll need to clear that one first. Tap the CHANGE VEHICLE icon in the bottom tool bar.

Once you choose CHANGE VEHICLE, the vehicle ID in the lower tool bar changes to NO ACTIVE VEHICLE. Now select ACTIVATE from the upper tool bar to activate the vehicle or RO you selected from the VEHICLE HISTORY files.

The vehicle ID on the bottom tool bar now indicates the vehicle you have chosen.

Now return to the main menu screen using the home icon on the lower tool bar.

Select SCANNER from the home page.

It now asks you to confirm the vehicle you've selected from the Vehicle History files. Select OK and you have automatically ID'd the RO vehicle and are ready to resume diagnosing this vehicle using the Scanner function. We’ll show you how to navigate further on any ID’d vehicle later in the video.

Now use the HOME icon to return to the main menu page.

The way to access a NEW vehicle is via the SCANNER selection from the home page menu.

Before we start be sure to select CHANGE VEHICLE from the bottom tool bar to clear the previous vehicle. Insure No Active Vehicle is displayed.

We are going to use the DEMONSTRATION vehicle built into the vehicle selection menu. Let’s create a new ID for the demo Vehicle. Select DEMONSTRATION from the bottom of the vehicle application menu.

Select US DOMESTIC

Tap Tahoe (4WD) Demo K

Choose the Tahoe to confirm Chevy Tahoe DEMONSTRATION vehicle selection

A reminder tells you that you are in DEMONSTRATION mode. You should not be connected to a vehicle’s Data Link Connector.

System Selection

After completing the vehicle ID, select the desired system to diagnose. For our purpose today select ENGINE. Navigation for all other systems is similar.

The screen indicates the correct adapter depending on the Year, Make and Model. On an OBD-II vehicle it will instruct you to connect the S3 scanner module and DA-4 cable to the Data Link Connector under the dash. For demo purposes this is not necessary, simply select CONTINUE.

Codes Menu

You now have access to all Engine functions for our Chevy Tahoe vehicle. This would be the same process if you were actually identifying and connecting to any of thousands of other customer’s vehicles. You are now ready to start diagnosing the vehicle. Select Codes Menu.

Our first step is to display codes. This opens a list of diagnostic trouble codes, or DTCs stored in the ECM. Tap Display Codes

Tap Engine/Trans Trouble Code Information

A list of DTCs appears, along with the code description. Don’t forget to scroll to see more codes.

Fix It

Notice the Fix It at the right of each code. You are presented with two choices when it comes to Fix It.

NOTE - Accounts and wireless access point required for SureTrack® and ShopKey® Pro.

Designed to help you improve diagnostic accuracy and reduce repair time. SureTrack™ is a comprehensive source of expert knowledge for professional technicians, combining diagnostic experience and detailed parts replacement records, all wrapped in an interactive community.

With ShopKeyPro.com or ProDemand.com Repair Information, links to the OEM trouble trees are automatically presented to VERUS PRO. Rather than navigating through menus, the information you need is just a tap away.

NOTE - Accounts and wireless access point required for SureTrack and ShopKey Pro.

Last Updated: July 31, 2019

Snap-on Diagnostic Tools and

Repair Information

Snap-on is a trademark of Snap-on Incorporated.

All other marks are marks of their respective holders.

©2019 Snap-on Incorporated. All Rights Reserved.

Got Questions?

Request Product Information

Online Product Help Here

Contact Diagnostic Customer Care

Send e-mail

(800) 424-7226

Mon - Fri 6am - 5pm PST

 

Product Registration:

• US     • Canada

We welcome your feedback on our website.

 

Enter your name:

email:

 

Please rate your experience in the following:
(1 being an unpleasant experience and 10 being exceptional)

Navigation

 1  2  3  4  5  6  7  8  9  10

Content

 1  2  3  4  5  6  7  8  9  10

 

Suggested improvements:


Can we contact you by e-mail to discuss your feedack further?

Yes

If you would like to receive e-mails from Snap-on about product releases, developments and promotions, please click the box below.

Yes - I would like to receive further e-mails from Snap-on about product releases, developments and promotions